How Our Wildfire Sprinkler Systems Work
Embers fall. Your roof, eaves and yard are already wet. That's what a FireRoofs system does, even after you've evacuated. Here's how we get your home there, from the first walk-around to the final test.
The visit takes about 45 minutes and covers the roof, vents, vegetation and fencing. You then get a written roadmap with hardening steps, a sprinkler design, cost and timeline.

Last updated: November 2026
How a FireRoofs Install Works, Step by Step
One team handles every step, from the first visit to the final test.
Request a Private Consultation
45 minutes at your home. We walk the roof, vents, fencing and plants. No commitment.
We Find Every Vulnerability
You see exactly where embers would get in, with a photo of every weak spot.
You Get a Complete Roadmap
A written plan with real prices and a timeline. You know what it costs before any work starts.
We Build It and Commission It
We test every zone, walk you through the app, and hand you the paperwork your insurer asks for.
45 minutes at your property. No commitment.
Sprinklers on the Roof, Eaves and Ground
Embers hit the roof, push into the eaves, and ignite brush at the foundation. The system wets all three at once.

Zone 01
Roof Zone
Your roof stays wet, and so does the 20 to 25 feet of ground around the house. Rotors near the roof edges throw water up to 35 feet to do it.
Metal roof? We shift focus to the eaves and perimeter.

Zone 02
Eave Zone
Most homes ignite here. Eave and soffit sprinklers wet the eaves, soffits and sides of the house, and saturate Zone 0, the first 5 feet around the home.

Zone 03
Perimeter Zone
Where your lot needs it, the brush 30 to 100 feet out is wet before fire reaches it. These heads face the hillside or the side most exposed to fire, at ground level or on 6-foot steel posts.
What You See on Your Phone When the System Turns On
Your phone tells you what's happening at home, step by step. Fire spotted. Sprinklers on. Then the all clear when it's over. Want control? Start it, pick a zone, or cancel, right from the app.

Satellite internet is recommended so the app keeps working if local internet fails.
Watch
See the System in Action
From Detection to Defense: What Happens Step by Step
You don't need to be home. You don't need to touch a thing. Here's what your system does on its own.
Satellite Wildfire Monitoring
Around the Clock
Regional satellite wildfire monitoring and fire incident data within a 5-mile radius, along with local weather conditions, drive alerts and activation.
Layer 1 of dual wildfire detection.
On-Property Camera Detection
Fire Alerts From Your Home
Cameras watch the area around the property for fire, send alerts and can activate the system.
Layer 2 of dual wildfire detection.
Automated Threat Escalation
Early Warning, Active Defense, Maximum Defense
Three threat levels: Early Warning, Active Defense and Maximum Defense. Water starts automatically for a confirmed fire and ramps up as the fire gets closer or conditions worsen. The owner can also start any threat level or individual zones manually from the app, or cancel. The controller has a physical emergency start button.
Push notification at every threat level change.
Roof, Eave, and Perimeter Sprinkler Activation
All Three Zones
Roof rotors throw water up to 35 feet, covering 20 to 25 feet around the house. Eave and soffit sprinklers wet the eaves, siding and Zone 0. Where needed, perimeter heads wet the ground 30 to 100 feet out.
Copper pipe throughout.
Optional Class A Foam Deployment
Maximum Surface Protection
On Fortress tier properties, Class A foam runs through the same heads and holds moisture longer than water. Biodegradable and non-toxic.
Foam is always optional.
Automatic Rinse, Reset, and System Confirmation
Back to Standby
When the threat clears, every zone rinses and returns to standby. The app gets a status report.
Ready for the next threat.
Dual Wildfire Detection That Works When You're Away
Regional satellite wildfire monitoring and on-property cameras, so the system never depends on a single source.

Regional Satellite Monitoring
Around the Clock
Watches for fires within 5 miles of your home, plus local weather, so you hear about it early.

On-Property Camera Detection
Fire Alerts From Your Home
Cameras on your home watch your own yard and hillside day and night. If they see fire, your phone knows and your sprinklers can start.
Home Hardening: Closing Every Gap Embers Can Find
Sprinklers wet the home. Hardening makes it harder to ignite. We handle both in one scope of work.
Home hardening is the work of making a house harder to ignite in a wildfire: a Class A roof, ember-resistant vents, enclosed eaves, multipane windows and noncombustible materials within 5 feet of the walls.
Ember-Resistant Vents
Ember-resistant vents, the kind your insurance asks for. Embers stay out of the attic, and air still flows.
FireRoofs coordinatedNoncombustible Fencing
Steel or masonry within 5 feet, so a fence cannot carry fire to the wall.
FireRoofs coordinated5-Foot Zone
Nothing that burns within 5 feet of the house. We refer this work to trusted Tree & Vegetation partners.
Tree & Vegetation partnerEnclosed Eaves and Soffits
Boxed-in eaves remove a common ember trap where roof meets wall.
FireRoofs coordinatedExterior Wall Cladding
Ignition-resistant siding from ground to roofline.
FireRoofs coordinatedYour Insurance Situation Shapes the Plan
Got a non-renewal notice? Already on the FAIR Plan? We plan the work around what your insurer cares about most.
Evaluate Your Insurance Situation
We review your coverage and any non-renewal notice to see what matters most.
Prioritize High-Impact Mitigation
Facing a deadline? We start with what your carrier weighs most.
Coordinate Active and Passive Scope
Sprinklers and hardening run on one schedule with one project manager.
Document Every Phase
Specs, photos and system records, mapped to the Safer from Wildfires categories the project touches.
Deliver the Evidence Packet
Use it for discount requests, non-renewal appeals and FAIR Plan exit plans.
Professional Installation, Coordinated by FireRoofs
- 3 to 10 days construction depending on property size and complexity
- 1 to 2 days commissioning and homeowner orientation
- 100% exterior-mounted on sealed roof mounts, attached the way solar is. No interior wall work
- Copper pipe throughout

Water Supply: What Happens When the Grid Fails
Your Own Water
Your system can run straight from a pool or storage tank, or from city water with your pool or tank as a backup that switches over automatically if pressure drops. Either way, the house is not left depending on city pressure during a fire.
No Pool or Tank?
We can add a storage tank sized to your system, or design around your city supply.
Backup Power
Runs on your home's generator or whole-home battery. Satellite internet is recommended.
In the January 2025 Palisades Fire, city water failed under demand. Hook up your pool or a tank, and your sprinklers keep running on your own water.
See It Installed on a Real Property
In August 2026 the Fern Fire started 1.2 miles from a FireRoofs client's home in the Santa Cruz Mountains, and the system turned on by itself. Read the Fern Fire case study.
Questions About How the System Works
How do wildfire sprinklers and home hardening work together?
They cover each other's gaps. Sprinklers wet the roof, eaves and the ground around the house when a fire is near, while hardening makes the house itself resist embers and heat. FireRoofs plans both in one scope of work and documents them against the Safer from Wildfires categories the project touches.
What is the difference between active and passive wildfire defense?
Active defense puts water on the house before fire arrives, using automated exterior fire sprinklers, with optional Class A foam on the Fortress tier. Passive defense makes the house harder to ignite with ember-resistant vents, enclosed eaves and noncombustible fencing. FireRoofs does both, and refers 5-foot zone and vegetation work to Tree & Vegetation partners.
Will the system work if I have already evacuated?
Yes. The system watches for fire near your home around the clock and turns on by itself when a fire is confirmed, so no one needs to be home. The FireRoofs app sends a push alert at each step, and you can start or cancel the system from the app at any time.
What insurance documentation does FireRoofs provide?
You get an evidence packet for your broker and carrier. It includes the pre-installation assessment, material specifications, progress photos, final system documentation and a checklist mapped to the Safer from Wildfires categories the project touches. FireRoofs will also join an underwriter call if your carrier asks.
How long does a wildfire sprinkler installation take?
Most sprinkler installations take 3 to 10 days of construction, plus 1 to 2 days of commissioning to test every zone. Hardening work varies by property and is scheduled alongside it. One project manager runs a single timeline, so you have one point of contact from the site visit to the final walk-through.

Reviewed by Shawn Gardner, Co-Founder, Director of Operations and Engineering at FireRoofs
Over 20 years in irrigation design and construction. About our teamLast updated November 2026
Sprinklers, Hardening, Documentation. Find Out What That Looks Like for Your Property.
We walk your property, photograph every weak point and give you a written plan. No commitment.


